Rempro 1 Litre Salt Neutraliser – Anti-Sulphate Tanking & Surface Treatment – Long Lasting Protection Against Salts in Masonry

DescriptionRempro Salt NeutraliserRempro Salt NeutraliserRempro Salt Neutraliser is an aqueous surface treatment, specifically developed to overcome the problem of white salts on mineral building surfaces from new render to old stone. Can be used on brickwork and masonry before the application of render as part of a damp proof course.An aqueous surface treatment, specifically developed to overcome the problem of white salts on mineral building surfaces from new render to old stone.Brush away or remove all loose surface salts and thoroughly soak the affected area with clean tap water. Apply Salt Neutraliser treatment by brush or roller to areas showing salts contamination.On new plasterwork or light salting use salt neutraliser diluted with 1:1 with waterNeutralises the action of salts to reduce efflorescenceApproximately 1 litre covers 10 square meters depending on the substrateNon-toxic, non-hazardous, solvent and plasticiser freeSuitable prior to tankingSize 1 litre & 5 litresCoverage 1 Litre concentrate treats 5 to 10m2.Directions for useBrush away or remove all loose salts.Thoroughly soak the affected area with clean tap water.Apply salt Neutraliser by brush or roller to areas showing salts contamination. Under most circumstances one coat or application will be adequate. a) Where heavy salting on old brickwork is being treated use Salt Neutraliser as the concentrate (container strength). b) On new plasterwork or light salting use Salt Neutraliser diluted with water up to 50/50 dilution rate.Some frothing may occur which is due to the reaction with the salts. Allow some time for the neutralising action to be completed. A white deposit may be left on the surface where original efflorescing has taken place and is sometimes difficult to remove.If re-decorating is to be applied on the treated surface the area should be washed with water and allowed to dry. Do not redecorate at any time until the treated areas are thoroughly dry.