DescriptionAvailable in 1 Litre – Suitable for Long Lasting Protection Against Salts in MasonryRempro Thermal PaintRempro is a thermal anti condensation paint designed to stop mould and damp by resisting the formation of condensation and mould on internal wall and ceiling surfaces. As condensation takes much longer to form compared to other paints, mould won’t grow.Rempro Anti Condensation Paint is a water based internal emulsion which will drastically reduce condensation formation by utilising Glass Microsphere technology. When incorporated into a paint film glass spheres act as miniature thermos-like bottles, providing a thermal barrier between cold surfaces and the warmer ambient temperature within a living space. As the air is insulated against the colder wall surface, condensation is controlled. This in turn inhibits mould and fungal growth.Walls painted with Rempro thermal anti condensation paint feel warmer to the touch as the heat from your hand is being reflected back instead of being drawn to the colder surface of the wall and escaping. The same principle can be applied to warm air from heating systems. Surfaces that have been coated with Rempro thermal anti condensation paint will help reduce heat loss due to the coatings ability to block heat transfer.Colours available – WhiteSizes available – 2.5 Litre, 5 Litre, 10 Litre, 25 LitreCoverage after 2 coats – Approximately 4-5m² per litrePreparationSurfaces should be clean, dry and free from grease and dirt. Remove all loose and defective paint. Lightly abrade glossy areas with abrasive paper. Avoid inhalation of dust. Wear a suitable face mask when dry sanding. Treat any visible mould with Rempro Mould Treat Spray. Please refer to separate information sheet on this product). Instructions for useEnsure the area is well ventilatedStir gently and thoroughly before use.DO NOT use a powered mixing paddleApplication temperature between 5-25°C2 coats requiredOptimum dry film thickness is 200 micronsThe product should be touch dry after 2 hours depending on humidity and temperatureRecoat after 4 hours. Allow for extra drying time in cold and wet weather conditionsFor best results, use a medium pile roller. Can also be brush appliedOver paint with a standard emulsion to achieve a smoother finish. You can also apply wallpaper over this coatingInternal use only on walls and ceilings. Can be applied to block, brick, render and plasterNew plasterwork should be allowed to dry completely before applying Rempro Thermal Paint
