CCT-30N : Simple PE cylindrically-conical fermentation tank 30 liters

Description The small cylindrically-conical fermentor (CCT/CCF)  with total volume 30 liters for non-pressure fermentation of beer, cider, wine and other beverages, in several variants, made of polyethylene. Main advantages : The cylindrically-conical vessel is ideal for unpressurized primary fermentation of beer, cider or similar alcoholic beverages. Due to its special design, the yeast collects in the cone bottom and can be collected and used again. Fermented beer or cider can be pumped out as a clear beverage using the upper outflow above sedimented yeast and fill it into bottles or pressure tanks for start the maturation under pressure. Its lid with dipping edge acts as a fermentation lock, therefore no other air lock is necessary. The PE ferementor is made of food safe polyethylene. Due to its smooth inner surface it is very easy to clean.   Standard equipment : Pure beer output fitting : BSP 3/4″ female Main bottom drain fitting : BSP 3/4″ female 2pcs of the outlet taps with valves Analog thermometer   Dimensions :   Optional accessories (not included in price of the tank) :   1. CCT-XXN-CS : Cooling spiral for PE fermentors CCT-XXN Cooling spiral is a dip heat exchanger for the cooling the wort before start of the fermentation process and cooling of the frementing beer inside the PE cylindrically-conical tanks. 2. CLC-1P1200: Compact liquid chiller and heater 1.2 kW with one pump The CLC-1P1200 GreenLine V is a compact water or glycol cooler and heater with integrated condenser. This cooling-heating unit is designed to cool or heat, with the accumulation of ice or water heating. It can be used for cooling or heating beer, ciders, freeze-drying wines. Cooling and heatong power is 1200 W (5/8 HP).   3. CIMG-2500 : Compact liquid cooler 500W (0.67HP) with two pumps and temperature regulators The CIMG-2500 is an efficient glycol cooler for two fermenters that has a fantastic cooling performance. It is compact, quiet and ideal for the home environment. It is powerful enough to independent cool up to two well-insulated fermenters up to 300L size. It has a cooling power of about 500 Watts (0.67 HP), so it is suitable for shock cooling even at high ambient temperatures. For maximum use of this unit, we recommend the use of propylene glycol (ideally about 30% concentration).