Description General Information For Molds with Posts: When preparing the mold with glass separator, make sure to cover every angle, especially if using a spray-on product If using a liquid separator such as kiln wash, make sure to give it ample time to dry before adding any frit If using frit, make sure the top of the post is uncovered before firing by brushing away excess glass When de-molding, wait until the mold is completely cool, then invert over a soft surface and gently thump it on the back if necessary Never try to pry the glass loose, as this may cause the post to break off Creative Paradise Inc. Description LF105 Holey Shamrock Mold Size: 3.5″ L x 3.25″ W x 1.75″ T Cavity Size: 2.75″ L x 2.75″ W Fill Weight: 42 grams Please click here for a general tutorial on Frit Casting and Holey molds. Please see second photo for important information on Holey molds. Refer to the table below for a suggested Full Fuse schedule for COE96 glass: Segment Rate Temp (F) Hold 1 300 1150 45 2 150 1300 20 3 400 1460 10 4 9999 950* 60 *If using COE90, adjust this temperature to 900 Refer to the table below for a suggested Tack Fire schedule for COE96 glass: (If fusing to a Tack Fire, we recommend using Powder and Fine frit, and filling uniformly 1/4″ full) Segment Rate Temp (F) Hold 1 300 1150 45 2 150 1300 20 3 400 1410 10 4 9999 950* 60 *If using COE90, adjust this temperature to 900
